Description
LCN 1460SEUS28 Electromagnetic Hold Open Standard Duty Closer (STD – Standard Arm). The LCN 1460SE Sentronic electromagnetic door closer is designed for use on fire and smoke barrier doors to provide a single point hold open option. The door remains held open until the current is interrupted causing the door to close in a controlled manner.
- Variant supplied with 1460SE-3071 non-handed cast iron cylinder, 1460SE-3077T non-handed arm, 4040SE-3038 Sentronic track (can be mounted on head frame or stop) and track roller 4040SE-3034SE
- Suits doors up to 136kg
- Supplied in silver as standard with plastic cover
- CE Certification is only applicable when the closer is mounted the the hinge (pull side) of the door
- Suitable for interior doors up to 1220mm
- Hold-open force can be adjusted
- Supplied with on / off switch board for testing door release
- Operates as a standard rack and pinion door closer whilst hold-open is not engaged
- Closer can be mounted on the push or pull side of the door
- Suitable for left or right hand mounting
- Sentronic track allows either concealed or surface wiring
- Can be interfaced with alarm systems
- Standard, plated and powder coat finishes are available on special request
- Butt hinge template allows a maximum opening of 110° allowing hold open to operate between 85° and 110°
- Optional SEL extended track can be ordered on special request allowing hold open points between 90° and 120°
- Butt Hinges should not exceed 127mm in width to allow normal closer operation
- BS EN 1634-1:2014 (timber) – 120 mins fire rated
- Recommended for standard duty applications on internal doors where high traffic is likely